First, install the GCC Puma 3 original cut software GreatCut. VectorCUT® 2.0 will not work without first installing the cutters original cut program. After installing GreatCut, make a test cut verifying that it works properly. 
Next, download and install VectorCUT® 2.0 by going to CadworxLIVE® homepage and select SUPPORT/Downloads.
After installing both programs, follow the instructions below...

Open VectorCUT® 2.0 by selecting the desktop icon...
1. In the Cutter pulldown list, select the GCC Puma 3.

2. Next, select the Properties button to the right of the Cutter list. 

3. Under the Port tab, select Printer Port and select the GCC Puma 3 in the pulldown list to the right and select OK.

• If the cutter is not listed, normally this means that the driver is not installed on the computer and will need to be installed. Note: The driver is installed when GreatCut is installed on the system.

4. Verify the connection by sending a test file from Design Studio to the cutter. 

• If it did not connect, go to Devices and Printers in your Windows Control Panel. The GCC Puma 3 should be listed under Printers and Faxes. Right click on the GCC Puma 3 and select Printer Properties. This opens the properties window for the cutter. Select the Port tab and verify that the cutter is paired with a USB port. If so and still not connecting to the cutter, if available, connect the USB cord to another USB port on the computer. In the Properties window, the GCC Puma 3 should switch to another port when changing USB ports. Select the new port with the check mark and select Apply/OK.

5. You should now be connect to VectorCUT® 2.0.